  Acoustic
Zen's new Adagio loudspeaker uses a pair of 6.5-inch
midrange/woofer driver in a specialized sandwich design with ceramic
external layers around a fabric internal layer for maximum stiffness
while minimizing cone breakup, flexing, and resonance.
A shortened, under-hung voice coil inside a long magnetic gap is said
to results in having the voice coil behave in an extremely linear
fashion throughout its entire travel, thereby reducing both harmonic and
TIM distortion.
A limited production modified 1.62-inch circular ribbon tweeter
has high power handling characteristics along with a linear impedance
and phase response. The 0.01mm heat resistant Kapton membrane is almost
weightless, providing an immediate and precise response to any
transients in the original music signal.
The tweeter is flanked above and below by the 6.5-inch driver,
with all drivers mounted on an enclosure with curved surfaces to
minimize external diffraction. At the bottom of the cabinet is the
internal transmission line port.
Nominal impedance is 6 ohm
Sensitivity 89dB/W/m.
Overall frequency response 30Hz to 30 kHz (±3dB)
 Two
way transmission line speaker system
Driver Unit
description:
Woofer:
2 pieces 6½” composed of doped ceramic coated fabric cone, 2 ½”
under-hung (short voice coil /long magnetic gap) voice coil linear motor
system, shielded 7oz Neodymium magnet.
Tweeter:
1 5/8” Round Ribbon, shielded 3.5 oz high flux energy and high
temperature
resistant magnet structure.
Nominal
Impedance: 6
ohm
Sensitivity:
89 dB / 1w / 1 meter
Crossover:
3 kHz / 18 dB / Octave, Linkwitz / Riley Crossovers.
Frequency
Response:
25Hz -30 kHz ± 3dB
Power
Handling: 50
- 200W
Weight:
78 lbs each.
Size:
48" H x 9" W x 13" D
SUGGESTED RETAIL PRICE:
$4,300/pair
|
Adagio Center
Channel Speaker
