|
melody audio amplifiers
preamplifiers io
 Response Audio
is proud to offer it's customers the fine products from Melody
Audio.
Melody represents some of the best
values in audio. Melody builds with
point-to-point wiring, hand wound
transformers, top quality internal
components and extensive testing for
every unit. Add stunning good looks and
you have a winner! Match the stunning
good looks and sound quality of the
Melody gear to equally stunning looks
and performance of the Purity Audio
Design products and you have a system
that will provide you with musical bliss
for a lifetime.
Stay tuned for more news as we update
this page. By the end of October 2011,
we will have a system together built
around the Melody M845 mono bloc
amplifiers driving a pair of Daedalus
Audio Ulysses loudspeakers with the
brains behind this system being the
Purity Audio Design "Reference"
linestage.
Authorized dealer covering the following
territories: Delaware, New Jersey, New
York, Connecticut, Rhode Island,
Massachusetts, Vermont, New Hampshire,
and Maine
Shown in
the picture below is a pair of M845 mono
bloc amplifiers driving the
Daedalus Audio Ulysses loudspeaker.
The brains of the system, the preamp, is
the
Purity Audio Design Ultra GT.
|
M845 Mono Bloc Amplifier Pair
The M845
amplifiers are the perfect example of what a reasonably priced
845 SET amplifier should deliver. The 21 watts of "large triode"
power should be plenty of power to drive most speakers of
moderate to high efficiency in smaller to moderate size rooms
and will drive high efficiency speakers, 94dB or higher in most
any size room.
Specifications
|
Vacuum Tubes |
|
845x1, 2A3x1,
6SN7x1 |
|
Power Output |
|
21w Class A |
|
Frequency
Response |
|
20Hz - 30KHz |
|
Speaker Taps |
|
4Ω, 8Ω |
|
Line Input
Sensitivity |
|
1V |
|
Signal to
Noise Ratio |
|
> 85dB |
|
THD at Rated
Power |
|
1% |
|
Dimensions |
|
11.4" x 8.5"
x 18.9" (W x H x D) |
|
Net Weight |
|
46.3lbs each |
|
Recommended
Preamplifier |
|
Purity Audio
Design Reference or higher |
|
Price |
|
$5,895 pr. |
Please
contact us for package deal specials including amplifier(s),
preamplifier and cabling.
|
|
PM845 twin 845 mono bloc amplifiers
The PM845
amplifiers at 70 watts provide you with enough power to drive
most any speaker in any size room. If you have never experienced
the sound of high power SET tubes, you owe it to yourself to
audition these 845 based amplifiers. Properly matched with the
right associated equipment and loudspeakers will provide you
with a lifetime of musical bliss.
Specifications
|
Vacuum Tubes |
|
845x2, 2A3x1, 6SN7x1 |
|
Power Output |
|
70w Class A |
|
Frequency Response |
|
20Hz - 30KHz |
|
Speaker Taps |
|
4Ω, 8Ω |
|
Line Input
Sensitivity |
|
1V |
|
Signal to Noise Ratio |
|
> 85dB |
|
THD at Rated Power |
|
1% |
|
Dimensions |
|
11.8" x 8x5" x 27.6"
(W x H x D) |
|
Net Weight |
|
99.2lbs each |
|
Recommended
Preamplifier |
|
Purity Audio Design
Reference or higher |
|
Price |
|
$7,959 pr. |
Please contact us for
package deal specials including amplifier(s), preamplifier and
cabling.
|
Authorized dealer covering the following territories:
Delaware, New Jersey, New York, Connecticut, Rhode Island,
Massachusetts, Vermont, New Hampshire, and Maine
As shown at RMAF 2011. I am honored to say I was able to sit
and relax in this room for a while after hours and enjoy the
sound of these beautiful amps. Don't take my word for it,
stop by and judge for yourself. This exact pair will be what
you listen to!
|
|
